曲面工具工具列
To open a toolbar...
FilletSrf
Create a constant-radius round surface between two surfaces.
ExtendSrf
Lengthen a surface by a value.
ChamferSrf
Create a ruled surface between two surface edges.
VariableFilletSrf
Create a round tangent surface between two surface edges with varying radius values.
不等距曲面混接
在两个曲面之间建立不等距的混接曲面。
VariableChamferSrf
Create a chamfer surface between surface edges with varying distance values.
BlendSrf
Create a blend surface between two surfaces with continuity control.
OffsetSrf
Copy a surface parallel to the original.
VariableOffsetSrf
Copies a surface in the normal direction with different distances at specified locations.
SetSurfaceTangent
Set the tangent direction of an untrimmed surface.
MatchSrf
Adjust a surface edge to have continuity with another surface edge.
MatchSrf, 多重衔接
可以同时衔接一个以上的边缘。
MergeSrf
Combine two surfaces at untrimmed edges.
RefitTrim
Replaces a trimmed surface edge with an untrimmed edge.
ConnectSrf
Extends or trims two surfaces to where they intersect.
对称
将曲线或曲面镜像，并使两个曲面以设定的连续性相接。
TweenSurfaces
Create intermediate surfaces between two input surfaces.
Rebuild
以设定的阶数与控制点数重建曲线、曲面或挤出物件。
RebuildUV
Reconstructs selected surfaces to degree 3, with a specified control point number, in either the u or v direction.
FitSrf
Reduce the number of surface control points.
ChangeDegree
在维持节点结构的情况下，通过增减曲线或曲面的控制点数量以变更曲线或曲面的阶数。
RebuildEdges
Restore surface edges to their surface.
Untrim
Remove trim curves from trimmed surfaces.
UnTrim, 保留修剪物件
将曲面的修剪边缘取消修剪并保留修剪曲线。
UntrimAll
Untrims interior (holes) and exterior trims on the selected surfaces all at once.
SplitRefitSurface
Splits a surface using a curve, and refits the two parts so that the edges from the split operation become untrimmed edges of two surfaces.
ShrinkTrimmedSrf
Contract the underlying untrimmed surface close to trimming boundaries.
ShrinkTrimmedSrfToEdge
Contract the underlying untrimmed surface as close as possible to the trimming boundaries.
MakeUniform
Make the object knot vectors uniform without changing the control point locations.
MakeUniformUV
使曲面的 U 或 V 方向的节点参数间距一致化。
MakePeriodic
移除封闭曲线 (曲面) 接缝的锐角 (锐边)。
MakeNonPeriodic
在封闭曲线 (曲面) 的接缝加入锐角 (锐边)。
SrfSeam
Change the location where the start and end edges meet on a closed surface.
ReplaceEdge
Untrim selected surface edges and retrim the edges.
UnrollSrf
Flatten (develop) a surface or polysurface with curvature in one direction to a planar surface.
FlattenSrf
Project surface edges onto the construction plane to create planar curves.
Smash
Flatten a surface without restriction to single-directional curvature.
Squish
Flatten a non-developable (curved in two directions) 3-D mesh or NURBS surface into a flat 2-D pattern.
SquishBack
Return curves and surfaces to the original squished 3-D shape.
EndBulge
调整曲线端点或曲面未修剪边缘处的形状。
DivideAlongCreases
Divide a surface into separate parts at kinks.
沿着锐边分割 - 分割正切边
将曲面在锐边和切线处分割。
RemoveMultiKnot
Remove multiple knots from curves and surfaces.
CurvatureAnalysis
Evaluate surface curvature using false-color analysis.
链接至曲面分析工具列
CurvatureAnalysisOff
Turn off curvature analysis display.
ShowEdges
Highlight edges of surfaces and polysurfaces. Displays the Edge Analysis control.
链接至边缘工具工具列
ShowEdgesOff
Turn off edge display.
CurvatureGraph
Evaluate curve or surface curvature with a graph.
CurvatureGraphOff
Turn off curvature graph display.
ShowDir
Open the Direction Analysis control and turn on direction analysis for curves, surfaces, and polysurfaces.
ShowDirOff
Close the Direction Analysis control, and turn off direction analysis.
Flip
Reverse the normal direction of a curve, surface, or mesh.
EdgeContinuity
Uses line hairs to visualize distance, tangency and curvature difference between an edge pair.