实体工具工具列
To open a toolbar...
BooleanUnion
Combine the volumes of one or more objects.
BooleanDifference
Subtract the volume of one set of objects from another.
BooleanIntersection
Create a new solid from solids' intersected volumes.
BooleanSplit
Split and close solids at intersections.
布尔运算两个物件
以一个物件减去另一个物件，并以两个物件交集的部分建立另一个物件。
CreateSolid
Create a closed polysurface from surfaces.
Shell
Remove the selected surfaces from a polysurface, and then offset the remaining surfaces to create a solid with a specified thickness.
Cap
Fills planar holes in objects with planar faces.
ExtractSrf
Separates or duplicates polysurface, Extrusion, or SubD faces.
MergeCoplanarFace
Combines adjacent coplanar faces of a mesh, polysurface, or SubD into a single face.
MergeAllCoplanarFaces
Combines the faces of each planar region on a mesh, polysurface, or SubD into a single face.
UnjoinEdge
Split joined polysurface edges.
编辑边缘圆角
编辑多重曲面边缘之间的相切曲面。
FilletEdge
Create a tangent surface between polysurface edges.
BlendEdge
Create a surface between polysurface edges maintaining continuity.
ChamferEdge
Create a ruled surface at polysurface edges.
WireCut
Trim a polysurface with a curve similar to cutting foam with a heated wire.
MoveFace
Move a polysurface face.
MoveUntrimmedFace
Move an untrimmed polysurface face.
将面移动, 至边界
将多重曲面的面移动至一个边界。
挤出面, 面至边界
将曲面边缘以直线挤出到一个边界。
SolidPtOn
Turn on pseudo control points for polysurfaces.
MoveEdge
Move a polysurface edge.
MoveUntrimmedEdge
Move the edge of an untrimmed polysurface face.
SplitFace
Divides the selected surface of a polysurface by drawing a polyline, selected curves, or isocurves.
FoldFace
Rotate polysurface faces around an axis.
Inset
Offsets the edges of selected mesh, SubD, or polysurface faces in a certain distance towards the center of each face.
RoundHole
Create circular holes in surfaces.
MakeHole
Project a closed curve to a surface to define a hole.
PlaceHole
Project a closed curve to a surface to define a hole.
RevolvedHole
Create holes by revolving a profile curve around an axis.
RotateHole
Rotate a hole around an axis.
ArrayHolePolar
Copy and space holes around a central location.
ArrayHole
Copy and space holes in rows and columns.
UntrimHoles
Untrims selected holes (interior trims) that do not touch surface borders.
取消修剪全部洞
取消修剪内部洞。
UnjoinEdge
Split joined polysurface edges.
DeleteFaces
Remove faces from a mesh, SubD or Polysurface to create a hole.
PushPull
Extrudes a polysurface face to interactively add or remove volumes on the polysurface.