从其他物件建立曲线
通过复制现有物件的边框、边缘、轮廓线创建新的曲线。
建立通过数个点的曲线
CurveThroughPolyline
Create a curve from polyline vertices.
CurveThroughPt
Fit a curve through point objects.
CurveThroughSrfControlPt
Fit curves through surface control points.
混接两条曲线或曲面
ArcBlend
Create an arc blend curve between two curves.
Blend
Connect two curves maintaining continuity.
BlendCrv
Connect two curves with continuity control.
Chamfer
Create a line segment between two curves and trims or extends the curves to meet it.
Fillet
Add an arc between two curves and trims or extends the curves to the arc.
复制曲面边缘
DupBorder
Create a curve or polyline that copies a surface, polysurface, or mesh border.
DupEdge
Create a curve that copies a surface edge.
DupFaceBorder
Creates a curve that copies a polysurface face border.
DupMeshEdge
Creates a polyline that duplicates the edge of a mesh.
DupMeshHoleBoundary
Create a polyline that duplicates the boundary of a mesh hole.
等距断面线与截面
Contour
Creates planar curves, points, or hatches by intersecting evenly spaced planes with the input objects.
CSec
Create cross-section curves through profile curves.
MeshOutline
Create a polyline outline of mesh objects or surface render mesh.
PointCloudContour
Create a series of planar curves by intersecting spaced planes with a point cloud.
PointCloudSection
Create a planar curve by intersecting a plane with points or pointcloud objects.
Section
Creates planar curves, points, or hatches by intersecting a plane with the input objects.
Silhouette
Create outline curves from a surface or polysurface.
从其他曲线建立曲线
Crv2View
Create a curve by averaging two input curves that are planar in two different views.
Offset
Copy a curve parallel to the original.
OffsetCrvOnSrf
Copy a curve on a surface parallel to the original.
OffsetNormal
Copy a curve on a surface parallel to the original in the surface normal direction.
Project
Project curves/points toward a construction plane to intersect a surface, polysurface, mesh, or SubD.
Pull
Moves curves and points toward the normal direction of a surface, mesh, polysurface, or SubD to find intersections.
ShortPath
Create the shortest possible curve (geodesic) between two points on a surface.
从曲面建立曲线
Bounce
Shoot a ray at a collection of surfaces to create a polyline path.
CreateUVCrv
Project a surface boundary and trim curves onto the world xy plane.
Intersect
Create point objects or curves at the intersections of curves and surfaces.
IntersectTwoSets
Find the intersection of one set of objects with another set of objects.
Make2D
Project geometry to the construction plane.