ExtrudeSubD
|
Toolbar |
Menu |
|---|---|
|
|
SubD Edit Tools > Extrude Faces and Boundary Edges |
ExtrudeSubD 指令可以以不同的挤出方向挤出细分物件的面和边缘。
步骤
-
执行指令。
-
选择细分物件的面或边界边缘进行挤出。
要挤出整个 SubD，在开始指令之前选择 SubD。
-
设置指令行选项。
-
指定或输入挤出距离。
指令行选项
EdgeLoop
Pick an edge on the boundary to select an edge loop.
Basis
WCS
All faces or boundary edges extrude in the same direction based on world coordinates.
Direction
Free
The direction is picked freely.
X/Y/Z
The direction is fixed to the world X, Y, or Z axis.
UVN
Each face or edge extrudes in the direction based on UVN coordinates.
Direction
Free
The direction is picked freely.
V (Boundary edges only)
Boundary edges extrude along the extending direction of the faces.
N
Faces extrude along vertex normal directions.
Boundary edges extrude perpendicular to the faces.
SetBasePoint
Picks a point as the starting point of the extruding distance.
请参考
ExtrudeMesh
Extrudes mesh faces and boundary edges with different direction modes.
ExtrudeSrf
Drive surface edges in a straight line to create a solid.
ExtrudeCrv
Drive closed planar curves in a straight line.