SetPt
| Toolbar | Menu |
|---|---|
|
|
Transform Set XYZ Coordinates |
The SetPt command moves selected points and control points of objects to a specified location in the x, y, and/or z directions.
- If the entire objects such as curves or surfaces are selected without showing control points, SetPt will move all of the objects’ control points to that location. This may result in a flattening or distortion of the object.
- This command is often used to accurately change the position of points and control points. It is also a fast way to be sure that a set of planar curves are all in the same plane.
步骤
选取物件。
在设定点对话框中选取要使用的轴向。
指定对齐的目标点。
The selected objects will line up with the set point in the direction(s) you chose.
附注
- To move in one direction, enable the checkbox only.
- Right-click on a checkbox to enable the checkbox and clear all the others.
- 如果要使用相同的设置重复此 SetPt 指令时，您可以单击右键重复指令，按 Enter 键或者按空格键接受当前设置。
- When block instances are selected, the block instances are aligned with their insertion points.
设置点选项
设定 X/设定 Y/设定 Z
Aligns objects in the x, y, and z directions.
设置选项的快捷方式
- Right-click on a checkbox to enable the direction and clear all the others.
- Right-click on a checkbox twice to enable all directions.
- 按键盘上的 x, y, z 键来切换复选框的选择。
以世界坐标对齐/以工作平面坐标对齐
Aligns with the world or construction plane coordinates.
指令行选项
复制 
Specifies whether or not the objects are copied.
A plus sign
appears at the cursor when copy mode is on.Copy=Yes supports History recording.
The RememberCopyOptions command determines whether the selected option is used as the default.